Crane Cams 700-0300 XR700 Points-to-Electronic Ignition Conversion Kit for Lucas Points Distributor

You looking to find the "Crane Cams 700-0300 XR700 Points-to-Electronic Ignition Conversion Kit for Lucas Points Distributor" Good news! You can purchase Crane Cams 700-0300 XR700 Points-to-Electronic Ignition Conversion Kit for Lucas Points Distributor with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $107.32 $96.12   

Product Feature

• Converts point distributors to electronic ignition
• Optical trigger for precise ignition timing
• Sealed for protection from dirt, oil, moisture, and vibration

Product Description

Crane Cams XR700 For Lucas helps to convert your points-type distributor to an electronic ignition with these Crane XR700 ignition modules. They offer increased timing accuracy and replace many Bosch, Lucas, Hitachi, and ND units. They feature an all-new status LED light for easy diagnostics and are fully potted for protection from dirt, moisture, and vibration. They're also highly reliable and precise, with their optical trigger design, and have a more powerful signal than points-type distributors.

Crane Cams 700-0300 XR700 Points-to-Electronic Ignition Conversion Kit for Lucas Points Distributor Review

I bought this to convert my "009" points distrubutor on an air-cooled VW vanagon. The kit comes with four or five different optical wheels, plus various brackets and things to fit a wide range of distributors. Unfortuantely, I only needed a couple of those parts (but obviously paid for all the rest, which went directly into the trash).

The other problem with the fact that this thing is designed to work on a huge range of distributors, is that it may not work on any particular one perfectly.

Initially, I had a very difficult time getting the optical wheel to slip down onto the distributor shaft--even with lubrication. I was worried I would break or deform the little plastic thing... When I finally pushed hard enough, it slipped all the way down and I couldn't get it back up. I ended up having to disassemble the distributor in order to try again.

To make matters worse, the optical sensor won't fit in after the wheel has been installed, so it has to be guided down along with the wheel. In fact, there's really not enough room for the sensor at all. I had to grind about an eighth of an inch off of the circumference of the wheel so that it didn't rub on the mounting screw of the sensor. I also had to file some of the distributor cap down so that it wouldn't hit the top of the sensor.

I did finally get it working though... It just wasn't very easy...

Most of the consumer Reviews tell that the "Crane Cams 700-0300 XR700 Points-to-Electronic Ignition Conversion Kit for Lucas Points Distributor" are high quality item. You can read each testimony from consumers to find out cons and pros from Crane Cams 700-0300 XR700 Points-to-Electronic Ignition Conversion Kit for Lucas Points Distributor ...

RediRad-FM Modulator/Car Radio Adapter for iPod / MP3 / CD / Sirius-XM Radio players

You looking to find the "RediRad-FM Modulator/Car Radio Adapter for iPod / MP3 / CD / Sirius-XM Radio players" Good news! You can purchase RediRad-FM Modulator/Car Radio Adapter for iPod / MP3 / CD / Sirius-XM Radio players with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $99.00   

Product Feature

• New technology provides superior interference protection.
• Easy installation, no need to drill holes in dash, no confusing wiring.
• Automatically changes from radio to portable music and back so there are no switches to mount.
• Made in USA with excellent customer service and support.
• High quality cables along with the latest technology in electronic design provide unbeatable performance and durability.

Product Description

The high-quality, American made RediRad-FM allows you to listen to any modern portable music player whether it's an iPod, CD player, Satellite Radio, or any other device that has a standard headphone jack. There is never any outside interference because the RediRad seamlessly routes music from your portable media player into your car's factory radio and bypasses the antenna. To install the RediRad, connect to vehicle power at the fuse panel, then "tee" the RediRad's coaxial cables between the radio's antenna socket and the vehicle's antenna cable. Tune the radio to FM 91.1, plug the RediRad's audio cable into your media player's headphone socket. Use the radio to adjust music volume and enjoy! The RediRad's compact package hides easily behind the dashboard and out of sight to help you preserve the factory appearance of your car, truck, or boat. RediRad has a 60 day Money-Back Guarantee.

RediRad-FM Modulator/Car Radio Adapter for iPod / MP3 / CD / Sirius-XM Radio players Review

Bought for my Goldwing and it works great. Stops local stations from walking over my XM Radio which I used to transmit to and play through the FM band on my radio.

Most of the consumer Reviews tell that the "RediRad-FM Modulator/Car Radio Adapter for iPod / MP3 / CD / Sirius-XM Radio players" are high quality item. You can read each testimony from consumers to find out cons and pros from RediRad-FM Modulator/Car Radio Adapter for iPod / MP3 / CD / Sirius-XM Radio players ...

Universal Backhoe Seat Pan & Cushion

You looking to find the "Universal Backhoe Seat Pan & Cushion" Good news! You can purchase Universal Backhoe Seat Pan & Cushion with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $102.50   

Product Feature

• Universal Backhoe Seat Pan & Cushion
• High Quality
• Brand New Fully guaranteed OEM spec
• Fits multiple applications

Product Description

Backhoe Pan W/ Cushion - Universal Backhoe Seat - Maximum Base Plate 14" x 14" - Hole Distance Width c-c 8"~11 1/2" - Hole Distance Length c-c 11 1/4"

Universal Backhoe Seat Pan & Cushion Review

The material, design and construction of this seat appears to very good. The metal seat bottom is drilled and tapped for several different size replacements. Mine was for a Case backhoe and was not a direct bolt in. My seat rails had a seat adjustment lever and original metal bottom was raised to accomadate for the thicker release handle. I was able to use this universal seat by placing one quarter inch shims on all four corners.

Most of the consumer Reviews tell that the "Universal Backhoe Seat Pan & Cushion" are high quality item. You can read each testimony from consumers to find out cons and pros from Universal Backhoe Seat Pan & Cushion ...

Irwin Industrial Tools 4935353 Metric Alignment Taps 3mm to 12mm with Coarse and Fine Thread Pitches

You looking to find the "Irwin Industrial Tools 4935353 Metric Alignment Taps 3mm to 12mm with Coarse and Fine Thread Pitches" Good news! You can purchase Irwin Industrial Tools 4935353 Metric Alignment Taps 3mm to 12mm with Coarse and Fine Thread Pitches with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $101.45    

Product Feature

• Contains 16 taps from 3mm to 12mm with National Corse and National Fine Thread pitches
• The self aligning taps feature a redesigned chamfer that allows the tap to align itself in the hole to create straight threads
• Features Irwins new chip Break Technology which makes breaking off chips 30% easier
• The increased Flute Taper makes the Taps 20% more durable
• Laser Etched Markings for easy identification

Product Description

Irwin self-aligning taps are engineered with Chip Breaking Technology (CBT) to cut chips better. Innovative Alignment Chamfer ensures straight threads every time, as well as increased flute taper. U.S.A. Metric Set: Yes, Thread Size: M3-M12 and 1/8 in.-28 BSP, Material Type: High carbon steel, Taps (qty.): 17

Irwin Industrial Tools 4935353 Metric Alignment Taps 3mm to 12mm with Coarse and Fine Thread Pitches Review

These taps are typical Irwin quality - very good. Don't expect the quality taps as you would find with Regal, Brubaker, Titex and the like. However, for the average home shop they will do a great job. I have used Irwin taps for many years for routine tapping jobs and they cut well, stay sharp for a fair amount of time, do not snap if the hole is drilled properly and good tapping technique is used.

These taps are taper taps with a very generous taper, which is how they center or align better. If you do not have a deep or through hole to tap they may disappoint. Plug taps would be better for the average hole, or you can start with these taps and buy bottoming taps.

These are very good taps at a very reasonable price. I have Irwin taps that are over 20 years old and still cut very nicely so I have no reservation in recommending them. However, if you need a precision thread then look for taps ground to tighter tolerances.

Most of the consumer Reviews tell that the "Irwin Industrial Tools 4935353 Metric Alignment Taps 3mm to 12mm with Coarse and Fine Thread Pitches" are high quality item. You can read each testimony from consumers to find out cons and pros from Irwin Industrial Tools 4935353 Metric Alignment Taps 3mm to 12mm with Coarse and Fine Thread Pitches ...

Dual XPA2500 300 Watt Amplifier

You looking to find the "Dual XPA2500 300 Watt Amplifier" Good news! You can purchase Dual XPA2500 300 Watt Amplifier with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $125.00   

Product Feature

• 50 Watts RMS x 2 channels @ 4 ohms
• Signal to noise ratio 72dBA
• Variable high pass corssover and variable low pass crossover
• Selectable crossover high pass low pass full range
• Variable bass boost
• Bridgeable operation
• Side mounted controls
• Bi-color LED status indicator

Product Description

Dual's XPA2500 300 Watt Amplifier features PWM MOSFET power supply, 2 ohm stable stereo operation, class AB output design, stereo/bridged simultaneous operation, bridgeable operation for subwoofer applications, extruded aluminum heatsink, barrier strip connection terminals. side mounted controls, auto-reset thermal overload protection, speaker short circuit protection, reverse polarity protection and bi-color LED status indicator.

Dual XPA2500 300 Watt Amplifier Review

I bought this a week ago and it is powering an 800 watt Kenwood 12" sub. I have to adjust the amp so it does not hit so hard so it does not drive me nuts with too much bass. Yes, I am older. LOL. It sounds good and enriches my stereo with good lows. Even when turned up, it does not hit as hard as my nephews 600 watt Crunch amp, but it is better than you would expect for a 300 watt $42 delivered amp. I will let you know if I have problems with relaiability.

Most of the consumer Reviews tell that the "Dual XPA2500 300 Watt Amplifier" are high quality item. You can read each testimony from consumers to find out cons and pros from Dual XPA2500 300 Watt Amplifier ...

Nissan Altima Sedan Spoiler Painted in the Factory Paint Code of Your Choice #255 NAD

You looking to find the "Nissan Altima Sedan Spoiler Painted in the Factory Paint Code of Your Choice #255 NAD" Good news! You can purchase Nissan Altima Sedan Spoiler Painted in the Factory Paint Code of Your Choice #255 NAD with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $99.00    

Product Feature

• Factory Fit Spoiler for the 2007 - 2012 Nissan Altima Sedan
• Factory Match Paint Included. The Paint Code is Located on the Driver Side Door Jam
• Lifetime Warranty on Paint and Manufacturing
• All Mounting Hardware and Detailed Instructions are Included
• Made from OEM Grade Blow Molded ABS Plastic

Product Description

Nissan Altima Sedan 2007- 2012 Painted Factory Style Spoiler with 3rd Brake Light comes in the Factory Paint Code of your choice. The Paint Code is located on the Driver Side Door Jam. Please verify the code on your car. All of our spoilers are painted with Spies Hecker paint which is Dupont's number 1 Paint Line and Dupont Clear Coat . All of our Spoilers are Buffed and Polished to a Showroom Finish. We offer the Best Aftermarket Spoiler in the Industry and back it with a Lifetime Warranty. Our Warranty covers the Paint against peeling and bubbling and the spoiler against warping or cracking under normal use for as long as you own your car.

Nissan Altima Sedan Spoiler Painted in the Factory Paint Code of Your Choice #255 NAD Review

after purchasing a new spoiler on amazon i am just finding out this was the very same company i encounter two years ago.i called the company wondering why my spoiler screw had broken off even with the correct installation and rust inhibitor to protect the screws.the owner of spoiler and wing king got in a screaming match with me on the phone, swearing at me , and telling me that it was all my fault. he would not honor my spoiler replacement so i had to buy a new one, just finding out now it was from the very same company!!!this guy is an idiot the owner, and i feel bad for the products he is selling to others.if this one does not hold up,i will at least have amazon to back me unlike the first time i bought it right through spoiler and wing king.i have also read a few others forums on Nissan and Chrysler with the same encounter with this company.h e will not honor you, he will insult you, and last but not least he will hang up the phone on you!!!AVOID AVOID AVOID

Most of the consumer Reviews tell that the "Nissan Altima Sedan Spoiler Painted in the Factory Paint Code of Your Choice #255 NAD" are high quality item. You can read each testimony from consumers to find out cons and pros from Nissan Altima Sedan Spoiler Painted in the Factory Paint Code of Your Choice #255 NAD ...